how do i transfer mac to mac ethernet cable

But to help you do it all by yourself, we’ve gathered our best ideas and solutions below.īefore Wi-Fi became the most popular and easiest way to connect to the internet, every Mac and computer used to connect using an Ethernet cable.

Setting up static IP addresses for use with EuCon and Artist Series controllers.So here's a tip for you: Download CleanMyMac to quickly solve some of the issues mentioned in this article.

IP: 169.254.001.003 (increment the last field for each additional unit, make sure you do not use the same IP address as set in step 9 above) Here is an example of the settings to be used with the above steps: See documentation for detailed steps (User Guide section A-1). You will also need to set a static IP address on the surface.

This will relaunch all EuCon processes with the new settings. Wait a few seconds, then press Start again. The default port setting can be changed in System Preferences > Euphonix)Ĩ) In the Configure drop down menu, choose 'Manually'ĩ) In the IP Address field, enter: 169.254.1.2 (example)ġ0) In the subnet mask field, enter: 255.255.0.0ġ2) Go to: System Preferences > Euphonix (v2.5.7 and earlier) or System Preferences > EUCON (v2.6 and later)ġ3) Press Stop. (If there are multiple Ethernet ports, use Ethernet port #1. Name it 'Artist Direct Connect' and click Done.Ħ) Under the Location drop down menu, choose 'Artist Direct Connect'ħ) Choose 'Ethernet' in the list on the left. if you wish for this to be the permanent default location, then skip to step 7ģ) Under the Location drop down menu, choose 'Edit Locations.'ĥ) Click the button with a gear icon and choose 'Duplicate Location'. System Preferences.) and press the Network icon.Ģ) Unlock the pane to enable changes (lower left corner of panel - it will ask for your password)

How do i transfer mac to mac ethernet cable